The Amur Gas Chemical Complex (GCC) project is set to house one of the world's largest and most advanced polymer production facilities
The Amur Gas Chemical Complex (GCC) project is set to house one of the world's largest and most advanced polymer production facilities
Bitumen, dense, highly viscous, petroleum-based hydrocarbon that is found in deposits such as oil sands and pitch lakes (natural bitumen) or is obtained as a residue of the distillation of crude oil (refined bitumen).
Oil refinery Brod is the only company in Bosnia and Herzegovina for petroleum processing and production of petroleum products.
After methane, ethane is the main component of natural gas, and is also found in marsh gas
Ethanolamines are prepared by the reaction of ammonia and ethylene oxide. They include monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA).
H2C=CH2, the simplest of the organic compounds known as alkenes, which contain carbon-carbon double bonds
On 1st January 2020, the maximum permissible global sulphur content of marine fuels is reduced from 3.5 % to 0.5% according to MARPOL Annex VI
Its a volatile, light, flammable and colorless liquid with a peculiar odor similar to but little sweeter than ethanol
MTO was developed as a 2-step process, which 1st converts natural gas via syn-gas to methanol, followed by its transformation to light olefins.
Its molecular formula is C7H14
Operated by Gazprom Neft, a subsidiary of Gazprom, it is one of the biggest and the most modern refineries in the country.
Its a versatile chemical treatment agent in oilfield. In oil extraction it could be used as a flooding agent, water shutoff regulator, drilling fluid regulator, fracturing fluid additives, especially in cementing, completion and workover.
Polyethylene, a member of the important family of polyolefin resin, is the most widely used plastic in the world.
Its a tough, rigid and crystalline thermoplastic produced from propene monomer. It is a linear hydrocarbon resin. PP is among the cheapest plastics available today.
Analysis of the composition of crude oils can be complex, but the simple analysis scheme is to divide an oil into its saturate, aromatic, resin, and asphaltene (SARA ) fractions.
it's all because of sulfur
White oils are highly refined mineral oils that are extremely pure, stable, colorless, odorless, non-toxic and chemically inert
