USD 64.3455

+0.09

EUR 71.0503

+0.2

BRENT 59.89

+59.89

AI-92 42.27

+0.11

AI-95 46.03

+0.1

AI-98 51.83

+0.01

Diesel 46.13

-0.02

217

BHGE introduces low-pressure-impact drilling fluid

Baker Hughes, a GE company (BHGE), announced the introduction of its DELTA-TEQ low-pressure-impact drilling fluid, a non-aqueous formulation that enables operators working in narrow pressure windows to meet their drilling objectives by significantly reducing the risks associated with this activity.

BHGE introduces low-pressure-impact drilling fluid

In challenging wells, like those offshore, pore pressure, fracture gradient, and complex geometry combine to create a narrow operating window. Numerous operational problems - such as excessive surge pressures, pressure spikes due to pump initiation pressures, complicated equivalent circulating density (ECD) management, and the inability to effectively control drilling parameters - can result in costly and time-consuming events.

Featuring an advanced formulation of specialized clay and polymers, the DELTA-TEQ fluid creates a non-progressive gel structure that reduces hydraulic impact with a rapid-set/easy-break profile. This profile maintains fluid integrity if operations are paused, mitigates pressure spikes when circulation resumes, and protects the formation from surge pressures when running casing.

In addition, the DELTA-TEQ fluid has the unique ability to manage hydraulic impact by maintaining the right viscosity in the right areas of the well for optimal hole cleaning and penetration rates without putting excess pressure on the formation. Like a “viscosity clutch,” it engages viscosity at low shear rates and disengages at high shear rates.

Recently, an independent national oil company deployed the DELTA-TEQ fluid in a challenging deepwater project in Brazil. The fluid retained its stability throughout a 2,149 ft (655 m) interval and enabled the operator to reach the section’s final measured depth at 9,258 ft (2822 m)—marking the entry into the reservoir with stable borehole conditions and no downhole losses.

The DELTA-TEQ fluid allowed the operator to increase flowrate by 14% and rate of penetration by 48% compared to offset wells, without significantly impacting pump pressure, equivalent circulating density, and torque and drag. Furthermore, the system reduced annular pressure variations by 47% compared to offsets, confirming the low-impact characteristics of the fluid.